94102811

Elevator relay XJ12 XJ12-J three-phase AC phase sequence protection phase sequence is suitable for Kone Thyssen Fuji elevator

XJ12 and XJ12-J have different sizes and cannot be used universally

XJ12-J three-phase AC protective relay. It adopts resistance-capacitance voltage reduction, which has the advantages of small size and light weight). It can not only detect and protect the motor phase misalignment and phase loss normally. The motor stops running immediately and the indicator light goes out. After troubleshooting, it resets itself and the indicator light turns on (returns to normal state). For grid fluctuations caused by the moment the motor starts or other reasons, the XJ12-J three-phase AC protection relay has strong penetrating ability, thus ensuring the normal operation of the system.


  • Brand: General
  • Type: XJ12
    XJ12-J
  • Supply Voltage: AC380V
  • Capacity: AC250V
    3A
  • Applicable: Kone&Thyssen&Fuji elevator
  • Product Detail

    Product Display

    elevator-relay-XJ12-three-phase-AC-phase-sequence-protection-phase-sequence-is-suitable-for-Kone-Thyssen-Fuji-elevator....

    Product Display

    Brand Type Applicable
    General XJ12/XJ12-J Kone&Thyssen&Fuji elevator

    Main technical conditions:
    1. Power supply voltage: three-phase ~380V (can have ±20% range). 50Hz.
    2. Electrical strength: terminal to shell: 2500VAC/1min. No breakdown or flickering.
    3. Insulation resistance: terminal to shell ≥50MΩ.
    4. Contact capacity: ~250V/3A.
    5. Power consumption: no more than 7W.
    6. Mechanical life: >600,000 times under normal circumstances.
    Normal working conditions:
    1. Temperature: -10℃~+40℃.
    2. Humidity: ≤85% (at room temperature 20℃±5℃).
    3. Three-phase voltage asymmetry <15%.
    4. Use standard 3TH card rail installation, with any installation angle.


  • Previous:
  • Next:

  • Write your message here and send it to us