94102811

Schindler Elevator 9300 9500 Electromagnetic Brake 897396 897200 Escalator Brake

Note: If there is a rectified large capacitor in the escalator control cabinet, use DC 97V, if not, use AC 110v, usually 110V.

 


  • Brand: Schindler
  • Type: ID.NR 89739
    ID.NR 897200
  • Applicable: Schindler Elevator 9300 9500
  • Product Detail

    Product Display

    Schindler-Elevator-9300-9500-Electromagnetic-Brake-897396-897200-Escalator-Brake.......

    Specifications

    Brand Type Voltage
    Schindler
    ID.NR 89739/ID.NR 897200 Schindler Elevator 9300 9500

    *1.2 terminal is the working current input terminal, the current and voltage are: 110V/50Hz120V/60Hz
      3.4 The terminal is a normally closed contact, that is, a switch signal (non-working state)
      5.6 terminal is a normally closed contact, that is, a switch signal (non-working state)
      Contact capacity: 3.4 terminals are AC250V/5A
      Contact capacity: 5.6 terminals are AC250V/6A
    *The working stroke of iron absorption should be controlled within 18 minutes, which can be obtained by adjusting the gap between the brake belt and the brake wheel.
    *When the iron-absorbing core slides out to the key position of the maximum stroke, no impact load or real tension is allowed on this position. Otherwise the core will be damaged.

    Escalator comb plate are generally exported in cartons or wooden boxes; if you have special needs, please contact customer service.


  • Previous:
  • Next:

  • Write your message here and send it to us