Thyssen elevator weighing board LMS1 070321

Thyssen elevator parts weighing box weighing board LMS1 070321. Also provide other models LMS1 1-V2.1 6634071660 / LMS1-C / LMS4, etc. LMS1 and LMS1-C are interchangeable and can completely replace each other. If you more data or othe models, please contact us directly.

Sequence of setting
Switch lift to recall/inpection mode and move car to a suitable position.
1. Set the installatiansite smitch to H02 set sersor installationsite, top of car (075) or bottom of car (135)
2. Set 0% ef rated load: Switch to H03, put empty car and adjust the postion of
Sensor lo the point where D205 (close indlcatng) and0206 (far indication) area all off. Save in and return.
3. Set 110% of rated load :Switch to H04, put 110% of rated load into car, save it and return.
4. Set addtional loads (Optional) : Switch to H05, select the necessary present of the rated load, and put the coorresponding loads into car, save and return.
5. Return to load display, when completed the operation above successfuly, switch to H00, the current load will be displayed.