94102811

Thyssen elevator weighing board LMS1-C


  • Brand: Thyssen
  • Product Type: Elevator PCB
  • Model Number: LMS1-C
  • MOQ: 1PC
  • Applicable: Thyssen elevator
  • Product Detail

    Product Display

    Thyssen elevator weighing board LMS1-C......

    Specifications

    Brand Product Type MOdel number Applicable MOQ Feature
    Thyssen Elevator PCB LMS1-C Thyssen Elevator 1PC Brand new

    Thyssen elevator parts weighing box LMS1-C car weighing device Thyssen G-070 weighing board. LMS1 and LMS1-C are interchangeable and can completely replace each other. If you more data or othe models, please contact us directly.

    Sequence of setting
    Switch ift lo recall/inspection mode and move car to a suitable position.
    1. Set the installationsite switch to H02 set sensor installationsite, top of car (075) or bottom of car (135)
    2. Set 0% of rated load: Switch to H03, put empty car and adjust the position of
    Sensor to the point where D205 (close indicating) and D206 (far indication) area all off. Save it and return.
    3. Set 110% of rated load: Switch to H04, put 110% of rated load into car, save it and return.
    4. Set additional loads (Optional): Switch to H05, select the necessary present of the rated load, and put the corresponding loads into car, save and return.
    5. Return to load dispilay, when completed the operation above successfully, switch to H00. the current load will be displayed.


  • Previous:
  • Next:

  • Write your message here and send it to us